Setting up a multi-satellite system on an Enigma2 receiver allows you to access channels from multiple satellites, giving you a wider range of content. Whether you’re using a motorized dish or multiple LNBs, this guide will walk you through the process step by step.
What You Need Before You Start
✅ An Enigma2 receiver (e.g., Vu+, Dreambox, Zgemma, etc.)
✅ A satellite dish (fixed or motorized)
✅ Multiple LNBs and a DiSEqC switch (if using a multi-LNB setup)
✅ A motorized mount (if using a single dish with multiple satellite positions)
✅ A properly aligned dish to receive signals from different satellites
✅ An active satellite TV subscription or CCcam/OSCam server access
Step 1: Connect Your Equipment
- For a Multi-LNB Setup:
- Install multiple LNBs on your dish and connect them to a DiSEqC switch.
- Connect the DiSEqC switch output to the LNB IN port on your Enigma2 receiver.
- For a Motorized Dish Setup:
- Mount the dish on a USALS or DiSEqC 1.2 motor.
- Connect the motor’s LNB output to your receiver.
Step 2: Configure the Satellite Settings in Enigma2
- Access the Tuner Configuration:
- Press the Menu button on your remote.
- Navigate to Setup > Service Searching > Tuner Configuration.
- Select the tuner connected to your dish.
- For a Multi-LNB Setup:
- Choose DiSEqC Mode 1.0 or 1.1 depending on your switch type.
- Assign each LNB to the correct satellite (e.g., LNB1 → Astra 19.2°E, LNB2 → Hotbird 13.0°E).
- For a Motorized Dish Setup:
- Choose DiSEqC 1.2 or USALS depending on your motor type.
- Enter your location coordinates for USALS or manually adjust satellite positions.
Step 3: Scan for Channels
- Go to Service Searching > Automatic Scan.
- Select the satellites you configured.
- Choose Blind Scan to find all available channels.
- Wait for the scan to complete and save the results.
Step 4: Organize Your Channels
- Use Bouquet Editor to create favorite lists.
- Remove duplicate or unwanted channels.
- Set up EPG (Electronic Program Guide) for easier navigation.
Troubleshooting Tips
🔹 No signal? Check LNB alignment, cable connections, and switch settings.
🔹 Channels missing? Perform a full blind scan instead of a predefined satellite scan.
🔹 Motorized dish not moving? Ensure the motor is powered correctly and set up with the right USALS/DiSEqC settings.
Conclusion
Setting up a multi-satellite system with Enigma2 unlocks a world of TV content. Whether you use a DiSEqC switch for multiple LNBs or a motorized dish, configuring your receiver correctly ensures optimal performance.
For the best experience, ensure you have a reliable CCcam or OSCam server to access premium content. Visit fullcccam.eu for high-quality CCcam servers!
🔹 Need help? Let us know in the comments below!