GTMedia receivers (such as V8 Nova, V8X, V7S, V9 Super, etc.) support CCCam, allowing you to watch encrypted satellite channels using a CCCam line. Follow this step-by-step guide to install and configure CCCam on your GTMedia device.
🔹 Requirements:
✅ GTMedia receiver (V8 Nova, V8X, V7S, V9 Super, etc.)
✅ Valid CCCam subscription (CCCam line details)
✅ USB flash drive or Internet access
✅ GTMedia remote control
🔹 Step 1: Connect Your GTMedia Receiver to the Internet
Before configuring CCCam, make sure your receiver is connected to the internet:
1️⃣ For Wi-Fi:
- Go to Menu > Network Settings > Wi-Fi
- Select your Wi-Fi network and enter the password.
2️⃣ For Ethernet:
- Simply connect an Ethernet cable from your router to the receiver.
🔹 Step 2: Access CCCam Setup Menu
1️⃣ Press the Menu button on your remote.
2️⃣ Navigate to Network > Camds Setup.
3️⃣ Select CCCam Client Setup.
🔹 Step 3: Add CCCam Line Manually
If you received your CCCam details in a text format (e.g., C: s1.fullcccam.eu 12000 user pass), you can enter them manually:
1️⃣ Inside CCCam Client Setup, select Manage CCCam.
2️⃣ Choose Add CCCam Account.
3️⃣ Enter the following details:
- Server: (e.g., s1.fullcccam.eu)
- Port: (e.g., 12000)
- Username: (your CCCam username)
- Password: (your CCCam password)
4️⃣ Press OK to save.
5️⃣ Now, select Active to enable the CCCam line.
🔹 Step 4: Load CCCam.cfg via USB (Alternative Method)
If you have a CCCam.cfg file, you can load it from a USB flash drive.
1️⃣ Copy the CCCam.cfg file to a USB drive.
2️⃣ Insert the USB into your GTMedia receiver.
3️⃣ Go to Menu > Network > Camds Setup > CCcam Client Setup.
4️⃣ Select Read CCCam.cfg from USB.
5️⃣ The system will import the CCCam line.
🔹 Step 5: Activate CCCam
1️⃣ In CCCam Client Setup, go to Manage CCCam.
2️⃣ Highlight your CCCam line and press OK.
3️⃣ Select Active and press OK.
4️⃣ Restart the receiver.
🔹 Step 6: Test Channels
1️⃣ Go to a scrambled (encrypted) channel.
2️⃣ Wait a few seconds for the decryption to work.
3️⃣ If the channel opens, your CCCam is working! 🎉
🔹 Troubleshooting
🛑 No channels opening?
- Ensure your CCCam line is active.
- Check your internet connection.
- Restart your receiver and try again.
🛑 CCCam line not connecting?
- Verify your CCCam details (server, port, username, password).
🛑 Receiver not reading CCCam.cfg from USB?
- Ensure the file is named correctly as CCCam.cfg.
- Format the USB drive to FAT32 and try again.
🎯 Final Thoughts
After completing these steps, your GTMedia receiver should be running CCCam successfully. Enjoy your satellite channels with smooth decryption! 🚀📡